In-line Pumping Systems – BG & BGL Series
BG/BGL series – inner of pipe type variable frequency booster system, is a kind of boost equipment consists of a stainless steel submersible pump and a water-filled submersible motor, which sealed in a pipeline after connected. Compared with traditional pump, the operation is quiet and the noise is below 40dB as the pump and motor are sealed in a pipeline and cooled by water flow through. Meanwhile, it is environmental friendly as the pump is made of stainless steel which complies to FDA and motor is stamping encapsulated type. It is easy to install at any angle without pump house. It also can compose a water supply unit with variable frequency control system.
Pump design |
|
Model | Inner of pipe type booster system |
Installation | Vertical / horizontal |
Suction | Side face / horizontal |
Maintenance | Motor & pull behind type |
Pump installation | Dry type |
Suction feature | Non self-priming |
Casing design | Diffuser |
Impeller | Closed – clockwise rotation |
Bearing | Radial bearing |
Lubrication | Water |
Installation position | Vertical / horizontal |
Connection | Coupling |
Driven type | Submersible motor |
Performance |
|
Max. Flow Q | 360m3h |
Min. Flow Q | 3m3h |
Max. Head H | 310m |
Min. Head H | 12m |
Max. Power N | 55kw |
Max. Speed n | 2950rpm |
Max. Pressure P2 | 32bar |
Max. Medium Temp. t | 90℃ |
Pump Material |
|
Casing | Stainless steel 1.4301/1.4401 |
Impeller | Stainless steel 1.4301/1.4401 |
Shaft | Stainless steel 1.4057、Duplex stainless steel 1.4462 |
Motor |
|
Efficiency | 50HZ/60HZ |
Voltage | 220-240v/380-420v/660-660v |
Protection grade | IP68 |
Insulation class | F |